Thermal insulation: In this article, the relationship between glasses used in windows and heat insulation to be applied in buildings will be examined. According to the data of the Ministry of Energy and Natural Resources, 82% of the energy used in buildings is used for heating, and the share of this energy in the total…
DetailsIn our country, 160 people die in approximately 500 fires every year. Especially in high-rise buildings, it is necessary to prevent the fire and the spread of heat, toxic gas and particles due to fire, which can allow the evacuation of the building in case of fire. In order to ensure fire safety on facades,…
Details
Facade elements dead load, wind, impact, etc. In order to prevent deformation due to factors or endanger life safety, static controls should be performed by an expert. The facade system elements that require static control before production are as follows; Profile static control: facade vertical profiles are checked for deflection and torsion values against wind…
DetailsFacades are systems that allow the building to be isolated from environmental noise sources. In order to achieve this, it is necessary to evaluate the facade material selections carefully and to use additional insulation solutions. Contributing elements to acoustic performance; Glass: The material that should be chosen correctly for acoustic insulation in facade systems is…
Details
Composite Sheet Coating Is the fire class of the composite board used selected in accordance with the fire regulation? Are the screws to be used selected as stainless, dacromet or geomet coated resistant to outdoor conditions? Is the silicone to be used selected with a fast curing, neutral property suitable for exterior conditions? Will the…
DetailsAluminum Joineries Is the profile system width (heat barrier width) selected in accordance with the project climate conditions, joinery height and installation elevation? Are profile sections, glass combinations, carrier elements, dowel sizes selected depending on the static calculation, can account reports be submitted? Does the profile system water and air tightness resistance meet the minimum…
Details